|
THE 'SAFTY ZONE' SEMI-PORTABLE CO DETECTOR with INTEGRAL ALARM AND DISPLAY
Gases: Carbon Monoxide (CO)
Signal output: 4-20 mA (typical)
Sensor type: Electrochemical cell
Range: 0-100 ppm
Standard Alarm Level: 10 ppm
Enclosure: ABS
Voltage requirement: 110 VAC, 60 Hz
Resolution: 1 PPM (typical)
Size: 3.75” diameter x 2.2”H
Linearity: Linear
Response time: T90%: Less than 40 seconds @ 25°C
Operating temperature: 0°C to 40°C
Operating humidity: 15-90% RH (constant)
0-98% RH (intermittent)
Audio Alarm: 85db at 3ft
Concentration Display: 3 Digit LCD
Power Supply: Standard 110 VAC Wall Outlet – Energy Star
Bridging the gap between inexpensive residential monitors and
more costly fixed commercial monitors, the Safety Zone
is also ideal for use in areas that are attached to garages or other
vehicle storage areas.
It includes a standard 110VAC wall plug, allowing it to be
easily set-up where it is required without the installation costs
typically associated with devices of this quality.
Electrochemical sensor technology offers extremely high
accuracy for detection of concentrations within workplace
health & safety limits.
Features:
• Highly Accurate Electrochemical Sensor
• Capability for 2-wire Connection to BAS
• Two Year Warranty
• LCD Concentration Display
• Ergonomic ABS enclosure
• Energy Star Plug-in Power Supply
According to the Canada Mortgage and Housing Corporation web site, 25 ppm is the maximum allowable concentration for continuous exposure for healthy adults in an eight-hour period.
The scary thing is the average CO detector at your local department store is calibrated at 200 ppm's.
Articles on the hazards of Carbon Monoxide:
|